Eagle, ID · Boise · 2026

How much does a deck cost in Eagle?

Eagle's hot, dry summers and cold winters are hard on wood; capped composite is popular, and footings need to clear the frost line.

Quick answer

A 12 × 16 ft raised deck with stairs and railing costs about $10,300 in pressure-treated wood or $15,500 in composite in Eagle, which is about 8% below the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do decks cost less in Eagle

Lower labor costs in the Boise area put deck prices in Eagle about 8% below our national ballpark. Footings below the frost line and framing sized for snow add to the cost of every deck here.

Eagle is an affluent, fast-growing suburb northwest of Boise along the Boise River, with large newer homes, foothill neighborhoods and plenty of new construction.

Our estimator applies the same Eagle adjustment when you price a deck at a Eagle address, so this page and your estimate match.

Eagle vs. national ballpark

−8%

12 × 16 ft composite deck, national
$16,896
Same job in Eagle
$15,544

Eagle deck prices by material

Installed, at Eagle prices: per square foot, and for a 12 × 16 ft deck raised 2–6 ft with one set of stairs and railing on three sides.

Deck cost in Eagle by material
MaterialPer sq ft12 × 16 ft deck onlyWith stairs & railing
Pressure-Treated Wood$32–$49$7,596$10,300
Cedar$41–$58$9,362$12,067
Composite$55–$72$12,012$15,544
PVC$64–$81$13,778$17,642

Best decking for Eagle

  1. 1
    Composite

    No staining or splinters; choose a light, heat-mitigating color for full sun.

  2. 2
    Cedar

    Real wood that stays cooler underfoot than composite; keep it sealed.

  3. 3
    Pressure-Treated Wood

    The budget choice; plan on sealing it every couple of years.

Building a deck in Eagle: what to plan for

Heat underfoot

Dark composite and PVC can get uncomfortably hot in full sun. Pick lighter colors or heat-mitigating boards, and plan shade.

Snow and frost

Footings must go below the local frost line so the deck doesn't heave, and the frame must carry snow load. Shovel with a plastic shovel to protect composite boards.

Wildfire

Decks are a common way embers reach a house. In wildfire zones, use ignition-resistant decking (some composites and PVC are rated), keep the space under the deck clear and use noncombustible material near the house.

Deck permits in Eagle

Most decks attached to a house, more than 30 inches off the ground or larger than 200 sq ft need a building permit, and many places are stricter. In Eagle, permits come from the City of Eagle. If you're in an HOA, get its approval too.

Idaho requires contractors to register with the Idaho Division of Occupational and Professional Licenses.

Eagle deck FAQ

How much does a deck cost in Eagle?

With our Eagle prices, a 12 × 16 ft deck raised 2–6 ft with stairs and railing costs about $10,300 in pressure-treated wood or $15,500 in composite. That's about 8% below the national average.

Why do decks cost less in Eagle?

Lower labor costs in the Boise area put deck prices in Eagle about 8% below our national ballpark. Footings below the frost line and framing sized for snow add to the cost of every deck here.

What's the best decking for Eagle?

Composite: No staining or splinters; choose a light, heat-mitigating color for full sun. Cedar: Real wood that stays cooler underfoot than composite; keep it sealed. Pressure-Treated Wood: The budget choice; plan on sealing it every couple of years.

Do I need a permit to build a deck in Eagle?

Most decks that are attached to the house, more than 30 inches off the ground or over 200 sq ft need a permit from the City of Eagle, and local rules can be stricter. Check before you build, and get HOA approval if you have one.

Does a deck need a railing?

Building codes based on the IRC require a guard (railing) on any open side where the deck surface is more than 30 inches above the ground below, at least 36 inches tall for most homes, with gaps small enough that a 4-inch ball can't pass through. Stairs with four or more risers need a graspable handrail.

How long does it take to build a deck?

A typical 200–400 sq ft deck takes a professional crew a few days to two weeks once materials and permits are in hand. Permits, inspections and contractor schedules often add more time than the build itself, so start planning a couple of months before you want to use it.

Related guides

See what your Eagle deck would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.