Seattle, WA · Seattle · 2026

How much does a new roof cost in Seattle?

Seattle roofs rarely see hail or extreme heat, but they sit wet for much of the year under trees that drop needles and shade the shingles. Moss, clogged gutters and slow leaks are what shorten roof life here.

Quick answer

A typical 2,000 sq ft roof replacement in Seattle costs about $14,300 with architectural shingles and about $26,400 with standing seam metal, including tear-off. That's about 10% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do roofs cost more in Seattle

Seattle labor costs run above the national average, and steep lots, tall houses and limited street parking for dumpsters add to the price.

Our estimator applies the same Seattle adjustment when you price a roof at a Seattle address, so this page and your estimate match.

Seattle vs. national ballpark

+10%

2,000 sq ft shingle roof, national
$13,000
Same job in Seattle
$14,300

Seattle roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at Seattle prices.

Roof replacement cost in Seattle by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$10,725$9,075$19,800$24,750
2,000 sq ft$14,300$12,100$26,400$33,000
2,500 sq ft$17,875$15,125$33,000$41,250
3,000 sq ft$21,450$18,150$39,600$49,500

The most common roofs in Seattle, and why

  1. 1

    Algae-resistant architectural shingles

    About $610–$830 per square installed in Seattle

    The most common choice; algae resistance helps against moss and streaking.

  2. 2

    Standing seam metal

    About $1,210–$1,430 per square installed in Seattle

    Moss has a harder time on metal, and its long life suits long-term owners.

  3. 3

    Torch-down and membrane flat roofs

    On many modern townhomes and flat-roofed additions.

Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.

What's different about roofs in Seattle

  • Zinc or copper strips near the ridge and trimmed branches slow moss growth; pressure washing strips granules and shortens roof life.
  • With needles and leaves falling year-round, gutters clog fast; gutter guards are worth adding when you re-roof.
  • Damp, mild winters can cause condensation in poorly ventilated attics, rotting the roof deck from below.

Rain, moss and trees

Long wet seasons and shade grow moss and algae that lift shingles and hold water. Algae-resistant shingles, zinc or copper strips near the ridge and trimmed branches extend roof life.

Roof permits and contractors in Seattle

A full roof replacement usually needs a permit and a final inspection from the Seattle Department of Construction and Inspections (SDCI). Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Washington contractors must be registered with Labor & Industries (L&I); look them up before you sign.

Seattle roofing FAQ

How much does a new roof cost in Seattle?

With our Seattle prices, replacing a 2,000 sq ft roof costs about $14,300 with architectural shingles or $26,400 with standing seam metal, including tear-off of one old layer. That's about 10% above the national average.

Why do roofs cost more in Seattle?

Seattle labor costs run above the national average, and steep lots, tall houses and limited street parking for dumpsters add to the price.

What kind of roof is most common in Seattle?

Algae-resistant architectural shingles. The most common choice; algae resistance helps against moss and streaking.

Do I need a permit to replace a roof in Seattle?

Usually. A full re-roof generally needs a permit and a final inspection from the Seattle Department of Construction and Inspections (SDCI). Your roofer normally pulls it, so confirm it's in the quote. Washington contractors must be registered with Labor & Industries (L&I); look them up before you sign.

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your Seattle roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.