Deck cost guide · 2026
How much does a deck cost?
Real numbers by material, size and height, straight from the same price table our free deck estimator uses. No email wall, no salesperson.
Quick answer
A new deck costs about $35–$88 per sq ft installed, depending on material and height. A 12 × 16 ft raised composite deck with stairs and railing comes to roughly $16,900; the same deck in pressure-treated wood is about $11,200.
Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.
Deck cost per square foot
Decking and framing, installed, before stairs and railing. Taller decks need deeper footings, bigger posts and more bracing, so the same boards cost more per square foot the higher they go.
| Material | Ground Level | Raised (2-6 ft) | Second Story | Lifespan |
|---|---|---|---|---|
| Pressure-Treated Wood | $35/sq ft | $43/sq ft | $53/sq ft | About 15–20 years with regular sealing |
| Cedar | $45/sq ft | $53/sq ft | $63/sq ft | About 15–20 years with regular sealing |
| Composite | $60/sq ft | $68/sq ft | $78/sq ft | 25–30+ years |
| PVC | $70/sq ft | $78/sq ft | $88/sq ft | 30+ years |
Deck cost by size
Deck surface only, for a deck raised 2–6 ft off the ground (the most common backyard deck). Add stairs and railing below.
| Deck size | Pressure-Treated Wood | Cedar | Composite | PVC |
|---|---|---|---|---|
| 10 × 10 ft (100 sq ft) | $4,300 | $5,300 | $6,800 | $7,800 |
| 12 × 12 ft (144 sq ft) | $6,192 | $7,632 | $9,792 | $11,232 |
| 12 × 16 ft (192 sq ft) | $8,256 | $10,176 | $13,056 | $14,976 |
| 16 × 20 ft (320 sq ft) | $13,760 | $16,960 | $21,760 | $24,960 |
| 20 × 20 ft (400 sq ft) | $17,200 | $21,200 | $27,200 | $31,200 |
Stairs, railing and removal
The parts of a deck quote people forget to budget for.
| Railing style | Per linear foot | 40 ft of railing |
|---|---|---|
| Wood | $40/ft | $1,600 |
| Composite | $65/ft | $2,600 |
| Aluminum | $75/ft | $3,000 |
| Cable | $120/ft | $4,800 |
| Glass | $160/ft | $6,400 |
| Deck height | One set of stairs |
|---|---|
| Ground Level | $500 |
| Raised (2-6 ft) | $1,500 |
| Second Story | $3,500 |
| Tear out an old deck | Price |
|---|---|
| Per sq ft | $10/sq ft |
| A 300 sq ft deck | $3,000 |
Example: what a typical deck costs
A 12 × 16 ft deck raised 2–6 ft off the ground, with one set of stairs and railing on its three open sides. Here's how it adds up in composite, the most requested material.
12 × 16 ft composite deck
- 12 × 16 ft deck (192 sq ft), raised 2–6 ft
- $13,056
- One set of stairs
- $1,500
- 36 ft of composite railing
- $2,340
- Estimated total
- $16,896
Prices from our deck estimator's ballpark table. Local quotes vary.
| Same deck in… | Estimated total |
|---|---|
| Pressure-Treated Wood | $11,196 |
| Cedar | $13,116 |
| Composite | $16,896 |
| PVC | $19,176 |
Compare decking materials
What you get for the money with each, and what it takes to keep it looking good.
Pressure-Treated Wood
$35–$53 per sq ft
Tight budgets, ground-level decks, and anyone who doesn't mind a weekend of staining
Cost guide →Cedar
$45–$63 per sq ft
Homeowners who want real wood that looks better than pressure-treated and stays cooler than composite
Cost guide →Composite
$60–$78 per sq ft
Families who want a deck that looks the same in ten years without weekend upkeep
Cost guide →PVC
$70–$88 per sq ft
Pool surrounds, docks, shady or damp yards, and anyone who wants the lowest-maintenance deck
Cost guide →What affects the cost of a deck
Size
Price scales with square footage, but small decks cost more per sq ft because setup, permits and stairs don't shrink with them.
Height off the ground
A second-story deck costs about $18 more per sq ft than the same deck at ground level, and its stairs cost several times as much.
Decking material
Boards are the biggest single choice: composite runs about $60–$78 per sq ft installed versus $35–$53 for pressure-treated wood.
Railing
Codes require a guard on any side more than 30 inches above the ground. Railing runs from wood at the low end to glass at the high end and can add thousands.
Shape and extras
Multiple levels, angles, curves, built-in benches, lighting and pergolas all add labor and materials on top of the base price.
Your site and permits
Slopes, rocky or clay soil, poor access for equipment, and permit and inspection fees vary by lot and by city.
How our deck estimator works
Most deck cost calculators ask you to guess your square footage. Ours starts from an aerial photo of your actual house. Enter your address, click around the area where you want the deck, and the tool measures it. Corners snap square, and you can place stairs on any edge and click the edges that need railing.
Then pick your decking, color, height and railing style and you'll see an itemized estimate instantly, using the same prices shown on this page. It's free, and nobody calls you unless you ask.
Deck costs in your city
Local prices, the decking that suit each city's climate, and permit notes for 100 cities.
Alabama
California
Connecticut
Florida
Idaho
Kansas
Michigan
Minnesota
Missouri
Nevada
New York
North Carolina
Oregon
Pennsylvania
South Carolina
Wisconsin
Deck cost FAQ
How much does a deck cost per square foot?
Our ballparks run from about $35 per sq ft for a ground-level pressure-treated deck to about $88 per sq ft for a second-story PVC deck, before stairs and railing. Composite, the most popular upgrade, runs about $60–$78 per sq ft.
What is the cheapest way to build a deck?
A simple rectangle, close to the ground, built with pressure-treated lumber. Low decks need less framing, may not need railing, and usually need only a step or two instead of a full staircase. Every corner and level you add costs more.
Do I need a permit to build a deck?
Usually. Under the International Residential Code, which most US cities adopt, a deck can skip a permit only if it's under 200 sq ft, no more than 30 inches above the ground, not attached to the house and not serving a required exit door. Your city or county may be stricter, so check with your local building department before you build.
Does a deck need a railing?
Building codes based on the IRC require a guard (railing) on any open side where the deck surface is more than 30 inches above the ground below, at least 36 inches tall for most homes, with gaps small enough that a 4-inch ball can't pass through. Stairs with four or more risers need a graspable handrail.
How long does it take to build a deck?
A typical 200–400 sq ft deck takes a professional crew a few days to two weeks once materials and permits are in hand. Permits, inspections and contractor schedules often add more time than the build itself, so start planning a couple of months before you want to use it.
Does a deck add value to a home?
A well-built deck adds usable outdoor living space, and national cost-vs-value surveys consistently show decks recouping a good share of their cost at resale, with wood decks typically recovering a higher percentage than composite ones. The bigger payoff is the years you spend using it.
See what your deck would cost
Trace it on your own house and get an itemized price in about two minutes. Free.