Wilmette, IL · Chicago · 2026
How much does a deck cost in Wilmette?
Wilmette lots are moderate and wooded; decks need deep footings for frost and composite or cedar boards that handle snow.
Quick answer
A 12 × 16 ft raised deck with stairs and railing costs about $12,900 in pressure-treated wood or $19,400 in composite in Wilmette, which is about 15% above the national average.
Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.
Why do decks cost more in Wilmette
The Chicago area has some of the highest construction labor costs in the country, and deck builders here charge accordingly, so expect prices about 15% above our national ballpark. Footings below the frost line and framing sized for snow add to the cost of every deck here.
Wilmette is a North Shore village on Lake Michigan with older Tudors, colonials and Prairie-style homes on leafy streets.
Our estimator applies the same Wilmette adjustment when you price a deck at a Wilmette address, so this page and your estimate match.
Wilmette vs. national ballpark
+15%
- 12 × 16 ft composite deck, national
- $16,896
- Same job in Wilmette
- $19,430
Wilmette deck prices by material
Installed, at Wilmette prices: per square foot, and for a 12 × 16 ft deck raised 2–6 ft with one set of stairs and railing on three sides.
| Material | Per sq ft | 12 × 16 ft deck only | With stairs & railing |
|---|---|---|---|
| Pressure-Treated Wood | $40–$61 | $9,494 | $12,875 |
| Cedar | $52–$72 | $11,702 | $15,083 |
| Composite | $69–$90 | $15,014 | $19,430 |
| PVC | $81–$101 | $17,222 | $22,052 |
Best decking for Wilmette
- 1Composite
Handles freeze-thaw and snow without splitting or needing sealant.
- 2Cedar
Real wood that resists rot naturally; seal it every year or two.
- 3Pressure-Treated Wood
The budget choice; plan on sealing it every couple of years.
Building a deck in Wilmette: what to plan for
Snow and frost
Footings must go below the local frost line so the deck doesn't heave, and the frame must carry snow load. Shovel with a plastic shovel to protect composite boards.
Severe storms
Wind loads matter for tall decks, pergolas and roofs over decks. Ask your builder about post bracing and lateral load connectors at the house.
Deck permits in Wilmette
Most decks attached to a house, more than 30 inches off the ground or larger than 200 sq ft need a building permit, and many places are stricter. In Wilmette, permits come from the Village of Wilmette. If you're in an HOA, get its approval too.
Illinois is one of the few states that licenses roofers statewide; ask for the roofer's state roofing license number.
Wilmette deck FAQ
How much does a deck cost in Wilmette?
With our Wilmette prices, a 12 × 16 ft deck raised 2–6 ft with stairs and railing costs about $12,900 in pressure-treated wood or $19,400 in composite. That's about 15% above the national average.
Why do decks cost more in Wilmette?
The Chicago area has some of the highest construction labor costs in the country, and deck builders here charge accordingly, so expect prices about 15% above our national ballpark. Footings below the frost line and framing sized for snow add to the cost of every deck here.
What's the best decking for Wilmette?
Composite: Handles freeze-thaw and snow without splitting or needing sealant. Cedar: Real wood that resists rot naturally; seal it every year or two. Pressure-Treated Wood: The budget choice; plan on sealing it every couple of years.
Do I need a permit to build a deck in Wilmette?
Most decks that are attached to the house, more than 30 inches off the ground or over 200 sq ft need a permit from the Village of Wilmette, and local rules can be stricter. Check before you build, and get HOA approval if you have one.
Does a deck need a railing?
Building codes based on the IRC require a guard (railing) on any open side where the deck surface is more than 30 inches above the ground below, at least 36 inches tall for most homes, with gaps small enough that a 4-inch ball can't pass through. Stairs with four or more risers need a graspable handrail.
How long does it take to build a deck?
A typical 200–400 sq ft deck takes a professional crew a few days to two weeks once materials and permits are in hand. Permits, inspections and contractor schedules often add more time than the build itself, so start planning a couple of months before you want to use it.
Related guides
See what your Wilmette deck would cost
Trace it on your own house and get an itemized price at local rates in about two minutes. Free.