Wilmette, IL · Chicago · 2026

How much does a new roof cost in Wilmette?

Wilmette is a North Shore village on Lake Michigan with older Tudors, colonials and Prairie-style homes on leafy streets.

Quick answer

A typical 2,000 sq ft roof replacement in Wilmette costs about $14,900 with architectural shingles and about $27,600 with standing seam metal, including tear-off. That's about 15% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do roofs cost more in Wilmette

Chicago-area construction labor is among the most expensive in the Midwest, much of it union, and Illinois licenses roofers statewide. Steep, older roofs with slate or tile and lakefront exposure push prices above average.

Our estimator applies the same Wilmette adjustment when you price a roof at a Wilmette address, so this page and your estimate match.

Wilmette vs. national ballpark

+15%

2,000 sq ft shingle roof, national
$13,000
Same job in Wilmette
$14,950

Wilmette roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at Wilmette prices.

Roof replacement cost in Wilmette by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$11,213$9,488$20,700$25,875
2,000 sq ft$14,950$12,650$27,600$34,500
2,500 sq ft$18,688$15,812$34,500$43,125
3,000 sq ft$22,425$18,975$41,400$51,750

The most common roofs in Wilmette, and why

  1. 1

    Architectural shingles

    About $630–$860 per square installed in Wilmette

    The most common re-roof on Wilmette homes.

  2. 2

    Slate and clay tile

    On Tudors and older estates.

  3. 3

    Cedar shake

    On some colonial and shingle-style homes.

Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.

What's different about roofs in Wilmette

  • Homes near Lake Michigan take stronger winds and lake-effect weather.
  • Many Wilmette homes were built before 1940 and have steep roofs, dormers and chimneys that need careful flashing.
  • Ice dams are a common winter problem on older homes with little attic insulation.

Snow and ice dams

Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.

Severe storms and high wind

Spring storms bring straight-line winds and the occasional tornado. Shingles rated for 110–130 mph, installed with the manufacturer's high-wind nailing pattern, hold on better.

Roof permits and contractors in Wilmette

A full roof replacement usually needs a permit and a final inspection from the Village of Wilmette. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Illinois is one of the few states that licenses roofers statewide; ask for the roofer's state roofing license number.

Wilmette roofing FAQ

How much does a new roof cost in Wilmette?

With our Wilmette prices, replacing a 2,000 sq ft roof costs about $14,900 with architectural shingles or $27,600 with standing seam metal, including tear-off of one old layer. That's about 15% above the national average.

Why do roofs cost more in Wilmette?

Chicago-area construction labor is among the most expensive in the Midwest, much of it union, and Illinois licenses roofers statewide. Steep, older roofs with slate or tile and lakefront exposure push prices above average.

What kind of roof is most common in Wilmette?

Architectural shingles. The most common re-roof on Wilmette homes.

Do I need a permit to replace a roof in Wilmette?

Usually. A full re-roof generally needs a permit and a final inspection from the Village of Wilmette. Your roofer normally pulls it, so confirm it's in the quote. Illinois is one of the few states that licenses roofers statewide; ask for the roofer's state roofing license number.

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your Wilmette roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.