Evanston, IL · Chicago · 2026

How much does a new roof cost in Evanston?

Evanston, home to Northwestern, has Victorian, Queen Anne and Prairie School homes, many in historic districts along the lake.

Quick answer

A typical 2,000 sq ft roof replacement in Evanston costs about $15,100 with architectural shingles and about $27,800 with standing seam metal, including tear-off. That's about 16% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do roofs cost more in Evanston

Chicago-area construction labor is among the most expensive in the Midwest, much of it union, and Illinois licenses roofers statewide. Older homes with steep, complex roofs and historic-district rules add to the price.

Our estimator applies the same Evanston adjustment when you price a roof at a Evanston address, so this page and your estimate match.

Evanston vs. national ballpark

+16%

2,000 sq ft shingle roof, national
$13,000
Same job in Evanston
$15,080

Evanston roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at Evanston prices.

Roof replacement cost in Evanston by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$11,310$9,570$20,880$26,100
2,000 sq ft$15,080$12,760$27,840$34,800
2,500 sq ft$18,850$15,950$34,800$43,500
3,000 sq ft$22,620$19,140$41,760$52,200

The most common roofs in Evanston, and why

  1. 1

    Architectural shingles

    About $640–$870 per square installed in Evanston

    The most common re-roof on Evanston homes.

  2. 2

    Slate and clay tile

    On historic homes, where repair can be better than replacement.

  3. 3

    Flat membrane roofs

    On two-flats, apartments and flat additions.

Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.

What's different about roofs in Evanston

  • Evanston has several historic districts where visible roof changes on landmark homes need approval.
  • Many homes are over 100 years old, with multiple old roof layers and decking that may need repair.
  • Lake winds and ice dams are the main threats in winter.

Snow and ice dams

Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.

Severe storms and high wind

Spring storms bring straight-line winds and the occasional tornado. Shingles rated for 110–130 mph, installed with the manufacturer's high-wind nailing pattern, hold on better.

Roof permits and contractors in Evanston

A full roof replacement usually needs a permit and a final inspection from the City of Evanston. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Illinois is one of the few states that licenses roofers statewide; ask for the roofer's state roofing license number.

Evanston roofing FAQ

How much does a new roof cost in Evanston?

With our Evanston prices, replacing a 2,000 sq ft roof costs about $15,100 with architectural shingles or $27,800 with standing seam metal, including tear-off of one old layer. That's about 16% above the national average.

Why do roofs cost more in Evanston?

Chicago-area construction labor is among the most expensive in the Midwest, much of it union, and Illinois licenses roofers statewide. Older homes with steep, complex roofs and historic-district rules add to the price.

What kind of roof is most common in Evanston?

Architectural shingles. The most common re-roof on Evanston homes.

Do I need a permit to replace a roof in Evanston?

Usually. A full re-roof generally needs a permit and a final inspection from the City of Evanston. Your roofer normally pulls it, so confirm it's in the quote. Illinois is one of the few states that licenses roofers statewide; ask for the roofer's state roofing license number.

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your Evanston roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.