Chicago, IL · Chicago · 2026

How much does a new roof cost in Chicago?

In Chicago, roofs fail from the top down in winter: snow piles up, melts during the day, refreezes at the cold eaves at night and forms ice dams that push water under shingles. The city's bungalows, two-flats and greystones each roof differently.

Quick answer

A typical 2,000 sq ft roof replacement in Chicago costs about $15,300 with architectural shingles and about $28,300 with standing seam metal, including tear-off. That's about 18% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do roofs cost more in Chicago

Chicago-area construction labor is among the most expensive in the Midwest, much of it union, and Illinois licenses roofers statewide. The short roofing season and tight city lots (alley access, small dumpsters) push prices higher still.

Our estimator applies the same Chicago adjustment when you price a roof at a Chicago address, so this page and your estimate match.

Chicago vs. national ballpark

+18%

2,000 sq ft shingle roof, national
$13,000
Same job in Chicago
$15,340

Chicago roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at Chicago prices.

Roof replacement cost in Chicago by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$11,505$9,735$21,240$26,550
2,000 sq ft$15,340$12,980$28,320$35,400
2,500 sq ft$19,175$16,225$35,400$44,250
3,000 sq ft$23,010$19,470$42,480$53,100

The most common roofs in Chicago, and why

  1. 1

    Architectural shingles

    About $650–$890 per square installed in Chicago

    On most bungalows and single-family homes.

  2. 2

    Modified bitumen and membrane flat roofs

    On two-flats, greystones and additions with flat roofs.

  3. 3

    Standing seam metal

    About $1,300–$1,530 per square installed in Chicago

    Sheds snow fast, which helps against ice dams.

Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.

What's different about roofs in Chicago

  • Many two-flats, bungalows and additions have flat or low-slope roofs that need membrane roofing rather than shingles.
  • Storms off the lake and across the prairie bring strong gusts; high-wind nailing patterns hold on better.
  • Shingles need warm enough temperatures to seal properly, so most Chicago re-roofs are scheduled April through November.

Snow and ice dams

Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.

Severe storms and high wind

Spring storms bring straight-line winds and the occasional tornado. Shingles rated for 110–130 mph, installed with the manufacturer's high-wind nailing pattern, hold on better.

Humidity and algae

Warm, humid weather grows the algae that leaves black streaks on shingles. Algae-resistant shingles (with copper granules) keep a roof looking new longer.

Roof permits and contractors in Chicago

A full roof replacement usually needs a permit and a final inspection from the Chicago Department of Buildings. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Illinois is one of the few states that licenses roofers statewide; ask for the roofer's state roofing license number.

Chicago roofing FAQ

How much does a new roof cost in Chicago?

With our Chicago prices, replacing a 2,000 sq ft roof costs about $15,300 with architectural shingles or $28,300 with standing seam metal, including tear-off of one old layer. That's about 18% above the national average.

Why do roofs cost more in Chicago?

Chicago-area construction labor is among the most expensive in the Midwest, much of it union, and Illinois licenses roofers statewide. The short roofing season and tight city lots (alley access, small dumpsters) push prices higher still.

What kind of roof is most common in Chicago?

Architectural shingles. On most bungalows and single-family homes.

Do I need a permit to replace a roof in Chicago?

Usually. A full re-roof generally needs a permit and a final inspection from the Chicago Department of Buildings. Your roofer normally pulls it, so confirm it's in the quote. Illinois is one of the few states that licenses roofers statewide; ask for the roofer's state roofing license number.

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your Chicago roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.