Upper Arlington, OH · Columbus · 2026
How much does a deck cost in Upper Arlington?
Upper Arlington's older lots favor patios and modest decks; frost footings and composite or cedar boards are standard.
Quick answer
A 12 × 16 ft raised deck with stairs and railing costs about $10,700 in pressure-treated wood or $16,200 in composite in Upper Arlington, which is about 4% below the national average.
Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.
Why do decks cost less in Upper Arlington
Lower labor costs in the Columbus area put deck prices in Upper Arlington about 4% below our national ballpark. Footings below the frost line and framing sized for snow add to the cost of every deck here.
Upper Arlington is an older, affluent Columbus suburb planned in the 1910s–20s, with Tudors, colonials and mid-century homes.
Our estimator applies the same Upper Arlington adjustment when you price a deck at a Upper Arlington address, so this page and your estimate match.
Upper Arlington vs. national ballpark
−4%
- 12 × 16 ft composite deck, national
- $16,896
- Same job in Upper Arlington
- $16,220
Upper Arlington deck prices by material
Installed, at Upper Arlington prices: per square foot, and for a 12 × 16 ft deck raised 2–6 ft with one set of stairs and railing on three sides.
| Material | Per sq ft | 12 × 16 ft deck only | With stairs & railing |
|---|---|---|---|
| Pressure-Treated Wood | $34–$51 | $7,926 | $10,748 |
| Cedar | $43–$60 | $9,769 | $12,591 |
| Composite | $58–$75 | $12,534 | $16,220 |
| PVC | $67–$84 | $14,377 | $18,409 |
Best decking for Upper Arlington
- 1Composite
Handles freeze-thaw and snow without splitting or needing sealant.
- 2Cedar
Real wood that resists rot naturally; seal it every year or two.
- 3Pressure-Treated Wood
The budget choice; plan on sealing it every couple of years.
Building a deck in Upper Arlington: what to plan for
Snow and frost
Footings must go below the local frost line so the deck doesn't heave, and the frame must carry snow load. Shovel with a plastic shovel to protect composite boards.
Severe storms
Wind loads matter for tall decks, pergolas and roofs over decks. Ask your builder about post bracing and lateral load connectors at the house.
Deck permits in Upper Arlington
Most decks attached to a house, more than 30 inches off the ground or larger than 200 sq ft need a building permit, and many places are stricter. In Upper Arlington, permits come from the City of Upper Arlington. If you're in an HOA, get its approval too.
Upper Arlington deck FAQ
How much does a deck cost in Upper Arlington?
With our Upper Arlington prices, a 12 × 16 ft deck raised 2–6 ft with stairs and railing costs about $10,700 in pressure-treated wood or $16,200 in composite. That's about 4% below the national average.
Why do decks cost less in Upper Arlington?
Lower labor costs in the Columbus area put deck prices in Upper Arlington about 4% below our national ballpark. Footings below the frost line and framing sized for snow add to the cost of every deck here.
What's the best decking for Upper Arlington?
Composite: Handles freeze-thaw and snow without splitting or needing sealant. Cedar: Real wood that resists rot naturally; seal it every year or two. Pressure-Treated Wood: The budget choice; plan on sealing it every couple of years.
Do I need a permit to build a deck in Upper Arlington?
Most decks that are attached to the house, more than 30 inches off the ground or over 200 sq ft need a permit from the City of Upper Arlington, and local rules can be stricter. Check before you build, and get HOA approval if you have one.
Does a deck need a railing?
Building codes based on the IRC require a guard (railing) on any open side where the deck surface is more than 30 inches above the ground below, at least 36 inches tall for most homes, with gaps small enough that a 4-inch ball can't pass through. Stairs with four or more risers need a graspable handrail.
How long does it take to build a deck?
A typical 200–400 sq ft deck takes a professional crew a few days to two weeks once materials and permits are in hand. Permits, inspections and contractor schedules often add more time than the build itself, so start planning a couple of months before you want to use it.
Related guides
See what your Upper Arlington deck would cost
Trace it on your own house and get an itemized price at local rates in about two minutes. Free.