Phoenix, AZ · Phoenix · 2026
How much does a deck cost in Phoenix?
In Phoenix, most backyard living happens on covered concrete patios, so a raised deck is usually a special project: a second-story balcony, a deck over a slope in the foothills, or a pool surround.
Quick answer
A 12 × 16 ft raised deck with stairs and railing costs about $10,100 in pressure-treated wood or $15,200 in composite in Phoenix, which is about 10% below the national average.
Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.
Why do decks cost less in Phoenix
Lower labor costs in the Phoenix area put deck prices in Phoenix about 10% below our national ballpark.
Phoenix has more tile roofs than almost anywhere in the country, plus plenty of flat foam roofs and shingles. The desert is hard on underlayment and asphalt: heat and UV, not snow or hail, set how long a Valley roof lasts.
Our estimator applies the same Phoenix adjustment when you price a deck at a Phoenix address, so this page and your estimate match.
Phoenix vs. national ballpark
−10%
- 12 × 16 ft composite deck, national
- $16,896
- Same job in Phoenix
- $15,206
Phoenix deck prices by material
Installed, at Phoenix prices: per square foot, and for a 12 × 16 ft deck raised 2–6 ft with one set of stairs and railing on three sides.
| Material | Per sq ft | 12 × 16 ft deck only | With stairs & railing |
|---|---|---|---|
| Pressure-Treated Wood | $32–$48 | $7,430 | $10,076 |
| Cedar | $41–$57 | $9,158 | $11,804 |
| Composite | $54–$70 | $11,750 | $15,206 |
| PVC | $63–$79 | $13,478 | $17,258 |
Best decking for Phoenix
- 1Composite
No staining or splinters; choose a light, heat-mitigating color for full sun.
- 2Cedar
Real wood that stays cooler underfoot than composite; keep it sealed.
- 3Pressure-Treated Wood
The budget choice; plan on sealing it every couple of years.
Building a deck in Phoenix: what to plan for
Monsoon storms
Summer monsoons bring sudden wind and downpours. Railings, shade structures and ledger connections should be built for wind.
Termites
Subterranean termites are common in the Valley. Keep wood off the soil and use treated framing or non-wood decking.
Heat underfoot
Dark composite and PVC can get uncomfortably hot in full sun. Pick lighter colors or heat-mitigating boards, and plan shade.
Deck permits in Phoenix
Most decks attached to a house, more than 30 inches off the ground or larger than 200 sq ft need a building permit, and many places are stricter. In Phoenix, permits come from the City of Phoenix Planning and Development Department. If you're in an HOA, get its approval too.
Arizona licenses contractors through the Registrar of Contractors (ROC); check a roofer's license number on the ROC website before you sign.
Phoenix deck FAQ
How much does a deck cost in Phoenix?
With our Phoenix prices, a 12 × 16 ft deck raised 2–6 ft with stairs and railing costs about $10,100 in pressure-treated wood or $15,200 in composite. That's about 10% below the national average.
Why do decks cost less in Phoenix?
Lower labor costs in the Phoenix area put deck prices in Phoenix about 10% below our national ballpark.
What's the best decking for Phoenix?
Composite: No staining or splinters; choose a light, heat-mitigating color for full sun. Cedar: Real wood that stays cooler underfoot than composite; keep it sealed. Pressure-Treated Wood: The budget choice; plan on sealing it every couple of years.
Do I need a permit to build a deck in Phoenix?
Most decks that are attached to the house, more than 30 inches off the ground or over 200 sq ft need a permit from the City of Phoenix Planning and Development Department, and local rules can be stricter. Check before you build, and get HOA approval if you have one.
Does a deck need a railing?
Building codes based on the IRC require a guard (railing) on any open side where the deck surface is more than 30 inches above the ground below, at least 36 inches tall for most homes, with gaps small enough that a 4-inch ball can't pass through. Stairs with four or more risers need a graspable handrail.
How long does it take to build a deck?
A typical 200–400 sq ft deck takes a professional crew a few days to two weeks once materials and permits are in hand. Permits, inspections and contractor schedules often add more time than the build itself, so start planning a couple of months before you want to use it.
Related guides
See what your Phoenix deck would cost
Trace it on your own house and get an itemized price at local rates in about two minutes. Free.