Mount Pleasant, SC · Charleston · 2026

How much does a deck cost in Mount Pleasant?

Mount Pleasant is porch and deck country: salt air demands stainless fasteners, and PVC or capped composite holds up best near the marsh.

Quick answer

A 12 × 16 ft raised deck with stairs and railing costs about $10,700 in pressure-treated wood or $16,200 in composite in Mount Pleasant, which is about 4% below the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do decks cost less in Mount Pleasant

Lower labor costs in the Charleston area put deck prices in Mount Pleasant about 4% below our national ballpark. Stainless hardware and wind-rated connections add to the cost of decks here.

Mount Pleasant sits across the Cooper River from Charleston, with Lowcountry-style homes, raised houses near the marsh and waterfront neighborhoods.

Our estimator applies the same Mount Pleasant adjustment when you price a deck at a Mount Pleasant address, so this page and your estimate match.

Mount Pleasant vs. national ballpark

−4%

12 × 16 ft composite deck, national
$16,896
Same job in Mount Pleasant
$16,220

Mount Pleasant deck prices by material

Installed, at Mount Pleasant prices: per square foot, and for a 12 × 16 ft deck raised 2–6 ft with one set of stairs and railing on three sides.

Deck cost in Mount Pleasant by material
MaterialPer sq ft12 × 16 ft deck onlyWith stairs & railing
Pressure-Treated Wood$34–$51$7,926$10,748
Cedar$43–$60$9,769$12,591
Composite$58–$75$12,534$16,220
PVC$67–$84$14,377$18,409

Best decking for Mount Pleasant

  1. 1
    PVC

    Can't absorb water, so salt, rain and humidity don't rot or swell it.

  2. 2
    Composite

    No staining, sealing or splinters, with long warranties.

  3. 3
    Pressure-Treated Wood

    The budget choice; plan on sealing it every couple of years.

Building a deck in Mount Pleasant: what to plan for

Hurricane winds

Decks here need hurricane ties, stronger ledger connections and stainless or hot-dipped galvanized hardware. Loose furniture and pergola covers become projectiles, so plan where they go.

Salt air

Use stainless steel fasteners and hardware near salt water; standard galvanized hardware corrodes fast. PVC and capped composite hold up best to salt and moisture.

Humidity and termites

Humid climates mean mildew and termites. Keep wood off the soil, use treated framing, and consider composite or PVC boards that termites won't eat.

Deck permits in Mount Pleasant

Most decks attached to a house, more than 30 inches off the ground or larger than 200 sq ft need a building permit, and many places are stricter. In Mount Pleasant, permits come from the Town of Mount Pleasant. If you're in an HOA, get its approval too.

Mount Pleasant deck FAQ

How much does a deck cost in Mount Pleasant?

With our Mount Pleasant prices, a 12 × 16 ft deck raised 2–6 ft with stairs and railing costs about $10,700 in pressure-treated wood or $16,200 in composite. That's about 4% below the national average.

Why do decks cost less in Mount Pleasant?

Lower labor costs in the Charleston area put deck prices in Mount Pleasant about 4% below our national ballpark. Stainless hardware and wind-rated connections add to the cost of decks here.

What's the best decking for Mount Pleasant?

PVC: Can't absorb water, so salt, rain and humidity don't rot or swell it. Composite: No staining, sealing or splinters, with long warranties. Pressure-Treated Wood: The budget choice; plan on sealing it every couple of years.

Do I need a permit to build a deck in Mount Pleasant?

Most decks that are attached to the house, more than 30 inches off the ground or over 200 sq ft need a permit from the Town of Mount Pleasant, and local rules can be stricter. Check before you build, and get HOA approval if you have one.

Does a deck need a railing?

Building codes based on the IRC require a guard (railing) on any open side where the deck surface is more than 30 inches above the ground below, at least 36 inches tall for most homes, with gaps small enough that a 4-inch ball can't pass through. Stairs with four or more risers need a graspable handrail.

How long does it take to build a deck?

A typical 200–400 sq ft deck takes a professional crew a few days to two weeks once materials and permits are in hand. Permits, inspections and contractor schedules often add more time than the build itself, so start planning a couple of months before you want to use it.

Related guides

See what your Mount Pleasant deck would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.