Seattle, WA · Seattle · 2026

How much does a deck cost in Seattle?

Seattle's enemy isn't heat or hail, it's moisture. Months of drizzle and shade make perfect conditions for moss and rot, so drainage, airflow and slip resistance matter more here than in most cities.

Quick answer

A 12 × 16 ft raised deck with stairs and railing costs about $12,300 in pressure-treated wood or $18,600 in composite in Seattle, which is about 10% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do decks cost more in Seattle

Labor costs in the Seattle area run above the national average, which puts deck prices in Seattle about 10% above our national ballpark.

Seattle roofs rarely see hail or extreme heat, but they sit wet for much of the year under trees that drop needles and shade the shingles. Moss, clogged gutters and slow leaks are what shorten roof life here.

Our estimator applies the same Seattle adjustment when you price a deck at a Seattle address, so this page and your estimate match.

Seattle vs. national ballpark

+10%

12 × 16 ft composite deck, national
$16,896
Same job in Seattle
$18,586

Seattle deck prices by material

Installed, at Seattle prices: per square foot, and for a 12 × 16 ft deck raised 2–6 ft with one set of stairs and railing on three sides.

Deck cost in Seattle by material
MaterialPer sq ft12 × 16 ft deck onlyWith stairs & railing
Pressure-Treated Wood$39–$58$9,082$12,316
Cedar$50–$69$11,194$14,428
Composite$66–$86$14,362$18,586
PVC$77–$97$16,474$21,094

Best decking for Seattle

  1. 1
    PVC

    Can't absorb water, so salt, rain and humidity don't rot or swell it.

  2. 2
    Composite

    No staining, sealing or splinters, with long warranties.

  3. 3
    Pressure-Treated Wood

    The budget choice; plan on sealing it every couple of years.

Building a deck in Seattle: what to plan for

Slopes

Hillside lots are common around Seattle, which means taller posts, more stairs and sometimes engineering. Steep-site decks cost more per sq ft than flat-yard decks.

Cedar country

Western red cedar grows in the Pacific Northwest, so it's easy to find here and a natural fit for the look of many Seattle homes.

Rain and moss

Wood that stays damp rots at board ends and on top of joists. Joist tape, good drainage and airflow under the deck, or moisture-proof PVC, keep a deck sound.

Deck permits in Seattle

Most decks attached to a house, more than 30 inches off the ground or larger than 200 sq ft need a building permit, and many places are stricter. In Seattle, permits come from the Seattle Department of Construction and Inspections (SDCI). If you're in an HOA, get its approval too.

Washington contractors must be registered with Labor & Industries (L&I); look them up before you sign.

Seattle deck FAQ

How much does a deck cost in Seattle?

With our Seattle prices, a 12 × 16 ft deck raised 2–6 ft with stairs and railing costs about $12,300 in pressure-treated wood or $18,600 in composite. That's about 10% above the national average.

Why do decks cost more in Seattle?

Labor costs in the Seattle area run above the national average, which puts deck prices in Seattle about 10% above our national ballpark.

What's the best decking for Seattle?

PVC: Can't absorb water, so salt, rain and humidity don't rot or swell it. Composite: No staining, sealing or splinters, with long warranties. Pressure-Treated Wood: The budget choice; plan on sealing it every couple of years.

Do I need a permit to build a deck in Seattle?

Most decks that are attached to the house, more than 30 inches off the ground or over 200 sq ft need a permit from the Seattle Department of Construction and Inspections (SDCI), and local rules can be stricter. Check before you build, and get HOA approval if you have one.

Does a deck need a railing?

Building codes based on the IRC require a guard (railing) on any open side where the deck surface is more than 30 inches above the ground below, at least 36 inches tall for most homes, with gaps small enough that a 4-inch ball can't pass through. Stairs with four or more risers need a graspable handrail.

How long does it take to build a deck?

A typical 200–400 sq ft deck takes a professional crew a few days to two weeks once materials and permits are in hand. Permits, inspections and contractor schedules often add more time than the build itself, so start planning a couple of months before you want to use it.

Related guides

See what your Seattle deck would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.