Bellevue, WA · Seattle · 2026
How much does a new roof cost in Bellevue?
Bellevue mixes 1950s–70s split-levels and ramblers in older neighborhoods with large new homes and rebuilds, many on wooded lots with tall Douglas firs.
Quick answer
A typical 2,000 sq ft roof replacement in Bellevue costs about $14,600 with architectural shingles and about $26,900 with standing seam metal, including tear-off. That's about 12% above the national average.
Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.
Why do roofs cost more in Bellevue
Bellevue runs a bit above Seattle: Eastside labor demand is high, homes are large, and tall trees over many lots add cleanup and safety work.
Our estimator applies the same Bellevue adjustment when you price a roof at a Bellevue address, so this page and your estimate match.
Bellevue vs. national ballpark
+12%
- 2,000 sq ft shingle roof, national
- $13,000
- Same job in Bellevue
- $14,560
Bellevue roof replacement prices by size
One-story house, medium pitch, including tear-off of one old layer, at Bellevue prices.
| Roof size | Architectural Shingles | 3-Tab Shingles | Standing Seam Metal | Clay Tile |
|---|---|---|---|---|
| 1,500 sq ft | $10,920 | $9,240 | $20,160 | $25,200 |
| 2,000 sq ft | $14,560 | $12,320 | $26,880 | $33,600 |
| 2,500 sq ft | $18,200 | $15,400 | $33,600 | $42,000 |
| 3,000 sq ft | $21,840 | $18,480 | $40,320 | $50,400 |
The most common roofs in Bellevue, and why
- 1
Algae-resistant architectural shingles
About $620–$840 per square installed in Bellevue
The most common roof on Eastside homes.
- 2
Standing seam metal
About $1,230–$1,460 per square installed in Bellevue
A popular upgrade on modern rebuilds and for moss resistance.
- 3
Cedar shake (now often replaced)
Many older Bellevue homes had cedar shake roofs, which are being replaced with shingles or synthetic shake.
Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.
What's different about roofs in Bellevue
- Tall evergreens over many lots drop needles year-round and shade roofs, making moss the leading cause of early roof failure.
- Windstorms in winter bring down limbs; trimming trees back from the roof is part of a good re-roof plan.
- Older cedar shake roofs are common teardown candidates because they're hard to insure and maintain.
Rain, moss and trees
Long wet seasons and shade grow moss and algae that lift shingles and hold water. Algae-resistant shingles, zinc or copper strips near the ridge and trimmed branches extend roof life.
Roof permits and contractors in Bellevue
A full roof replacement usually needs a permit and a final inspection from the City of Bellevue. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.
Washington contractors must be registered with Labor & Industries (L&I); look them up before you sign.
Bellevue roofing FAQ
How much does a new roof cost in Bellevue?
With our Bellevue prices, replacing a 2,000 sq ft roof costs about $14,600 with architectural shingles or $26,900 with standing seam metal, including tear-off of one old layer. That's about 12% above the national average.
Why do roofs cost more in Bellevue?
Bellevue runs a bit above Seattle: Eastside labor demand is high, homes are large, and tall trees over many lots add cleanup and safety work.
What kind of roof is most common in Bellevue?
Algae-resistant architectural shingles. The most common roof on Eastside homes.
Do I need a permit to replace a roof in Bellevue?
Usually. A full re-roof generally needs a permit and a final inspection from the City of Bellevue. Your roofer normally pulls it, so confirm it's in the quote. Washington contractors must be registered with Labor & Industries (L&I); look them up before you sign.
What is a roofing square?
Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.
How do I know how big my roof is?
Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.
Related guides
See what your Bellevue roof would cost
Trace it on your own house and get an itemized price at local rates in about two minutes. Free.