Bend, OR · Bend · 2026

How much does a new roof cost in Bend?

Bend is a high-desert city on the east side of the Cascades with Craftsman homes downtown, newer neighborhoods on the west side and homes among ponderosa pines.

Quick answer

A typical 2,000 sq ft roof replacement in Bend costs about $13,300 with architectural shingles and about $24,500 with standing seam metal, including tear-off. That's about 2% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

What drives roof prices in Bend

Prices run near the national average: Central Oregon labor is in demand, and snow, wildfire rules and a shorter building season add a little.

Our estimator applies the same Bend adjustment when you price a roof at a Bend address, so this page and your estimate match.

Bend vs. national ballpark

+2%

2,000 sq ft shingle roof, national
$13,000
Same job in Bend
$13,260

Bend roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at Bend prices.

Roof replacement cost in Bend by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$9,945$8,415$18,360$22,950
2,000 sq ft$13,260$11,220$24,480$30,600
2,500 sq ft$16,575$14,025$30,600$38,250
3,000 sq ft$19,890$16,830$36,720$45,900

The most common roofs in Bend, and why

  1. 1

    Architectural shingles

    About $560–$770 per square installed in Bend

    The most common roof in Bend's neighborhoods.

  2. 2

    Standing seam metal

    About $1,120–$1,330 per square installed in Bend

    Sheds snow, resists fire and suits Bend's mountain-modern homes.

What's different about roofs in Bend

  • Bend sits in a high-desert climate with hot, dry summers, cold winters and big daily temperature swings.
  • Many west-side neighborhoods border national forest where wildfire risk is high; Class A roofing and clean gutters are essential.
  • Snow loads are real in winter, and ice-and-water shield along the eaves is standard.

Wildfire

In wildfire areas, a Class A fire-rated roof is the baseline and often required by code. Asphalt shingles, metal and tile can all reach Class A; untreated wood shakes cannot. Ember-resistant vents and clean gutters matter as much as the roof.

Snow and ice dams

Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.

Heat and UV

Intense sun and heat age asphalt shingles faster. Lighter colors, reflective (cool roof) products and good attic ventilation help the roof last and cut cooling bills.

Roof permits and contractors in Bend

A full roof replacement usually needs a permit and a final inspection from the City of Bend. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Oregon contractors must be licensed by the Construction Contractors Board (CCB), which also handles disputes.

Bend roofing FAQ

How much does a new roof cost in Bend?

With our Bend prices, replacing a 2,000 sq ft roof costs about $13,300 with architectural shingles or $24,500 with standing seam metal, including tear-off of one old layer. That's about 2% above the national average.

What drives roof prices in Bend?

Prices run near the national average: Central Oregon labor is in demand, and snow, wildfire rules and a shorter building season add a little.

What kind of roof is most common in Bend?

Architectural shingles. The most common roof in Bend's neighborhoods.

Do I need a permit to replace a roof in Bend?

Usually. A full re-roof generally needs a permit and a final inspection from the City of Bend. Your roofer normally pulls it, so confirm it's in the quote. Oregon contractors must be licensed by the Construction Contractors Board (CCB), which also handles disputes.

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your Bend roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.