Arlington, VA · Washington, DC · 2026

How much does a new roof cost in Arlington?

Arlington's single-family neighborhoods are full of 1920s–50s brick colonials, Cape Cods and bungalows, plus many new homes on small lots.

Quick answer

A typical 2,000 sq ft roof replacement in Arlington costs about $13,500 with architectural shingles and about $25,000 with standing seam metal, including tear-off. That's about 4% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do roofs cost more in Arlington

Washington-area labor costs run a little above the national average, and many homes have steep, complex roofs. Small lots and dense streets make staging harder.

Our estimator applies the same Arlington adjustment when you price a roof at a Arlington address, so this page and your estimate match.

Arlington vs. national ballpark

+4%

2,000 sq ft shingle roof, national
$13,000
Same job in Arlington
$13,520

Arlington roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at Arlington prices.

Roof replacement cost in Arlington by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$10,140$8,580$18,720$23,400
2,000 sq ft$13,520$11,440$24,960$31,200
2,500 sq ft$16,900$14,300$31,200$39,000
3,000 sq ft$20,280$17,160$37,440$46,800

The most common roofs in Arlington, and why

  1. 1

    Architectural shingles

    About $570–$780 per square installed in Arlington

    On most Arlington homes.

  2. 2

    Slate

    On some older colonials.

  3. 3

    Standing seam metal

    About $1,140–$1,350 per square installed in Arlington

    On porches and modern infill homes.

Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.

What's different about roofs in Arlington

  • Arlington is a county with no separate cities, so all permits come from Arlington County.
  • Small lots and street parking limits can make dumpster placement and staging tricky.
  • Many older homes have additions with low-slope roofs that need membrane roofing.

Humidity and algae

Warm, humid weather grows the algae that leaves black streaks on shingles. Algae-resistant shingles (with copper granules) keep a roof looking new longer.

Snow and ice dams

Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.

Roof permits and contractors in Arlington

A full roof replacement usually needs a permit and a final inspection from Arlington County. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Virginia requires contractors to be licensed by the Department of Professional and Occupational Regulation (DPOR).

Arlington roofing FAQ

How much does a new roof cost in Arlington?

With our Arlington prices, replacing a 2,000 sq ft roof costs about $13,500 with architectural shingles or $25,000 with standing seam metal, including tear-off of one old layer. That's about 4% above the national average.

Why do roofs cost more in Arlington?

Washington-area labor costs run a little above the national average, and many homes have steep, complex roofs. Small lots and dense streets make staging harder.

What kind of roof is most common in Arlington?

Architectural shingles. On most Arlington homes.

Do I need a permit to replace a roof in Arlington?

Usually. A full re-roof generally needs a permit and a final inspection from Arlington County. Your roofer normally pulls it, so confirm it's in the quote. Virginia requires contractors to be licensed by the Department of Professional and Occupational Regulation (DPOR).

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your Arlington roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.