McLean, VA · Washington, DC · 2026

How much does a new roof cost in McLean?

McLean is one of the wealthiest communities near Washington, with large colonials, estates along the Potomac and many luxury rebuilds.

Quick answer

A typical 2,000 sq ft roof replacement in McLean costs about $13,400 with architectural shingles and about $24,700 with standing seam metal, including tear-off. That's about 3% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do roofs cost more in McLean

Washington-area labor costs run a little above the national average, and many homes have steep, complex roofs. Estate-sized roofs in slate and cedar push McLean higher.

Our estimator applies the same McLean adjustment when you price a roof at a McLean address, so this page and your estimate match.

McLean vs. national ballpark

+3%

2,000 sq ft shingle roof, national
$13,000
Same job in McLean
$13,390

McLean roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at McLean prices.

Roof replacement cost in McLean by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$10,043$8,498$18,540$23,175
2,000 sq ft$13,390$11,330$24,720$30,900
2,500 sq ft$16,738$14,163$30,900$38,625
3,000 sq ft$20,085$16,995$37,080$46,350

The most common roofs in McLean, and why

  1. 1

    Designer architectural shingles

    About $570–$770 per square installed in McLean

    On most homes.

  2. 2

    Natural and synthetic slate

    On luxury colonials and estates.

  3. 3

    Cedar shake

    On traditional homes.

Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.

What's different about roofs in McLean

  • McLean is unincorporated, so building permits come from Fairfax County.
  • Large custom homes have complex roofs with dormers, turrets and copper accents.
  • Mid-Atlantic weather brings summer thunderstorms, occasional hurricane remnants and winter snow.

Humidity and algae

Warm, humid weather grows the algae that leaves black streaks on shingles. Algae-resistant shingles (with copper granules) keep a roof looking new longer.

Snow and ice dams

Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.

Roof permits and contractors in McLean

A full roof replacement usually needs a permit and a final inspection from Fairfax County (McLean is unincorporated). Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Virginia requires contractors to be licensed by the Department of Professional and Occupational Regulation (DPOR).

McLean roofing FAQ

How much does a new roof cost in McLean?

With our McLean prices, replacing a 2,000 sq ft roof costs about $13,400 with architectural shingles or $24,700 with standing seam metal, including tear-off of one old layer. That's about 3% above the national average.

Why do roofs cost more in McLean?

Washington-area labor costs run a little above the national average, and many homes have steep, complex roofs. Estate-sized roofs in slate and cedar push McLean higher.

What kind of roof is most common in McLean?

Designer architectural shingles. On most homes.

Do I need a permit to replace a roof in McLean?

Usually. A full re-roof generally needs a permit and a final inspection from Fairfax County (McLean is unincorporated). Your roofer normally pulls it, so confirm it's in the quote. Virginia requires contractors to be licensed by the Department of Professional and Occupational Regulation (DPOR).

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your McLean roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.