Draper, UT · Salt Lake City · 2026

How much does a new roof cost in Draper?

Draper sits at the south end of the Salt Lake Valley against the Wasatch foothills, with mostly newer, larger single-family homes built since the 1990s.

Quick answer

A typical 2,000 sq ft roof replacement in Draper costs about $12,000 with architectural shingles and about $22,100 with standing seam metal, including tear-off. That's about 8% below the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do roofs cost less in Draper

Prices run below the national average: Wasatch Front labor costs are moderate, and Draper's newer homes have straightforward roofs.

Our estimator applies the same Draper adjustment when you price a roof at a Draper address, so this page and your estimate match.

Draper vs. national ballpark

−8%

2,000 sq ft shingle roof, national
$13,000
Same job in Draper
$11,960

Draper roof replacement prices by size

One-story house, medium pitch, including tear-off of one old layer, at Draper prices.

Roof replacement cost in Draper by roof size and material
Roof sizeArchitectural Shingles3-Tab ShinglesStanding Seam MetalClay Tile
1,500 sq ft$8,970$7,590$16,560$20,700
2,000 sq ft$11,960$10,120$22,080$27,600
2,500 sq ft$14,950$12,650$27,600$34,500
3,000 sq ft$17,940$15,180$33,120$41,400

The most common roofs in Draper, and why

  1. 1

    Architectural shingles

    About $510–$690 per square installed in Draper

    The standard on most Draper homes.

  2. 2

    Concrete tile

    Found on some larger homes in the foothill neighborhoods.

  3. 3

    Metal accents

    About $1,010–$1,200 per square installed in Draper

    Common over porches and on modern farmhouse-style homes.

Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.

What's different about roofs in Draper

  • Canyon winds coming out of the Wasatch can gust hard along Draper's east bench, so high-wind shingle installation pays off.
  • Winters bring regular snow, so ice-and-water shield at the eaves is standard practice.
  • Foothill neighborhoods border wildland, where Class A roofing and ember-resistant vents are wise.

Snow and ice dams

Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.

Wildfire

In wildfire areas, a Class A fire-rated roof is the baseline and often required by code. Asphalt shingles, metal and tile can all reach Class A; untreated wood shakes cannot. Ember-resistant vents and clean gutters matter as much as the roof.

Roof permits and contractors in Draper

A full roof replacement usually needs a permit and a final inspection from the City of Draper. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.

Utah contractors must be licensed by the Division of Professional Licensing (DOPL).

Draper roofing FAQ

How much does a new roof cost in Draper?

With our Draper prices, replacing a 2,000 sq ft roof costs about $12,000 with architectural shingles or $22,100 with standing seam metal, including tear-off of one old layer. That's about 8% below the national average.

Why do roofs cost less in Draper?

Prices run below the national average: Wasatch Front labor costs are moderate, and Draper's newer homes have straightforward roofs.

What kind of roof is most common in Draper?

Architectural shingles. The standard on most Draper homes.

Do I need a permit to replace a roof in Draper?

Usually. A full re-roof generally needs a permit and a final inspection from the City of Draper. Your roofer normally pulls it, so confirm it's in the quote. Utah contractors must be licensed by the Division of Professional Licensing (DOPL).

What is a roofing square?

Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.

How do I know how big my roof is?

Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.

Related guides

See what your Draper roof would cost

Trace it on your own house and get an itemized price at local rates in about two minutes. Free.