Park City, UT · Salt Lake City · 2026
How much does a new roof cost in Park City?
Park City is a mountain resort town at about 7,000 feet, with historic miners' houses in Old Town and large ski homes and cabins in the surrounding developments.
Quick answer
A typical 2,000 sq ft roof replacement in Park City costs about $14,000 with architectural shingles and about $25,900 with standing seam metal, including tear-off. That's about 8% above the national average.
Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.
Why do roofs cost more in Park City
Park City runs above the national average: heavy snow loads, steep mountain roofs, a short building season, access on steep lots and resort-town labor costs all add up.
Our estimator applies the same Park City adjustment when you price a roof at a Park City address, so this page and your estimate match.
Park City vs. national ballpark
+8%
- 2,000 sq ft shingle roof, national
- $13,000
- Same job in Park City
- $14,040
Park City roof replacement prices by size
One-story house, medium pitch, including tear-off of one old layer, at Park City prices.
| Roof size | Architectural Shingles | 3-Tab Shingles | Standing Seam Metal | Clay Tile |
|---|---|---|---|---|
| 1,500 sq ft | $10,530 | $8,910 | $19,440 | $24,300 |
| 2,000 sq ft | $14,040 | $11,880 | $25,920 | $32,400 |
| 2,500 sq ft | $17,550 | $14,850 | $32,400 | $40,500 |
| 3,000 sq ft | $21,060 | $17,820 | $38,880 | $48,600 |
The most common roofs in Park City, and why
- 1
Standing seam metal
About $1,190–$1,400 per square installed in Park City
Sheds heavy snow and suits mountain architecture; snow guards are a must.
- 2
Synthetic or treated shake and slate
Used on mountain-lodge homes; wildfire risk favors Class A rated products.
- 3
Architectural shingles
About $590–$810 per square installed in Park City
On more modest homes and condos.
Our estimator prices shingle, metal and tile roofs; get a local roofer's quote for flat, slate or shake roofs.
What's different about roofs in Park City
- Roofs here are designed for very heavy snow loads, and snow sliding off metal roofs needs snow guards over entries, decks and driveways.
- Old Town's historic district has design guidelines that govern roof materials and forms.
- The roofing season is short: most re-roofs happen between late spring and early fall.
Snow and ice dams
Snow that melts and refreezes at the eaves forms ice dams. Ice-and-water shield along the eaves and in valleys, plus good attic insulation and ventilation, keep meltwater out of the house.
Wildfire
In wildfire areas, a Class A fire-rated roof is the baseline and often required by code. Asphalt shingles, metal and tile can all reach Class A; untreated wood shakes cannot. Ember-resistant vents and clean gutters matter as much as the roof.
Roof permits and contractors in Park City
A full roof replacement usually needs a permit and a final inspection from the City of Park City. Your roofer normally pulls the permit, so confirm it's in the quote, and check HOA or design-review rules before changing material or color.
Utah contractors must be licensed by the Division of Professional Licensing (DOPL).
Park City roofing FAQ
How much does a new roof cost in Park City?
With our Park City prices, replacing a 2,000 sq ft roof costs about $14,000 with architectural shingles or $25,900 with standing seam metal, including tear-off of one old layer. That's about 8% above the national average.
Why do roofs cost more in Park City?
Park City runs above the national average: heavy snow loads, steep mountain roofs, a short building season, access on steep lots and resort-town labor costs all add up.
What kind of roof is most common in Park City?
Standing seam metal. Sheds heavy snow and suits mountain architecture; snow guards are a must.
Do I need a permit to replace a roof in Park City?
Usually. A full re-roof generally needs a permit and a final inspection from the City of Park City. Your roofer normally pulls it, so confirm it's in the quote. Utah contractors must be licensed by the Division of Professional Licensing (DOPL).
What is a roofing square?
Roofers price by the square: 100 sq ft of roof surface. A 2,000 sq ft roof is 20 squares. Because a sloped roof has more surface than the area it covers, your roof is usually bigger than your house's footprint.
How do I know how big my roof is?
Measure the outline of the roof from above, including the overhangs, then multiply by your pitch factor: about 1.05 for a low-slope roof, 1.16 for a medium pitch and 1.30 for a steep one. Our free estimator does this for you: trace your roof on the aerial view of your house and pick a pitch.
Related guides
See what your Park City roof would cost
Trace it on your own house and get an itemized price at local rates in about two minutes. Free.